Application information
"WHEN YOU NEED A HOLE IN SOMETHING HARD - BE PREPARED"
Unique Features of the Sub-Micron Tungsten Carbide
Square Die Drills
-
Full length back taper permits drilling without binding.
-
Four straight Radial Relieved cutting edges for free cutting.
-
Square body Provides four outlets to clear chips efficiently and permit maximum
coolant flow.
-
Soft steel shank absorbs chuck irregularities and machine vibrations so tool runs true.
-
For long wear and ease of penetration in dense, hard materials - tool geometry has
greatest possible web strength and support to cutting edge.
-
Only finger pressure required to drill hardest steel from 40 Rc to 70+ Rc.
-
Drill cool, unannealed holes. Hole walls maintain hard surface.
-
Drill without "Binding" and breaking tool from over torquing.
-
Drill hardened die sections without distortion.
-
Drills hardened armor plate, tool and die steel and high alloy steel.
-
Ideal for Die and Mold Repair and Maintenance.
-
Four-point contact on the periphery provides precision guide and continious support.
-
All four contact points are relieved to prevent "Rubbing" or "Drag".
-
CAUTION - Do not use to cut stainless steel or non-ferrous metals.
Return to Table of Contents
International Carbide Corporation
Last Updated August 6, 2009